Siemens FCM2041-U3 - Page 12

BASIC OPERATION
FCM2041-U3 OPERATOR INTERFACE MANUAL | CHAPTER 1
1-8
Once all events are acknowledged and audibles silenced, a Reset System soft key
becomes available in the lower right side of the display. If Fire notification appliances
were active, two additional soft keys become available at the bottom of the screen.
These allow the operator to silence or unsilence the notification appliances (audibles).
When Fire notification appliances are silenced the Audibles Silenced LED lights.
Press the More Info/+ button to display a screen showing details relating to the
selected event. Additional soft keys appear at the bottom of this screen, including one
that displays a map of the area in which the event occurred, provided this information
has been programmed using the Zeus tool. The operator can return to the previous
screen by pressing the —
(FCM2041-U3) button, which is adjacent to the More
Info/+ button.
The FCM2041-U3 supports the display of up to nine event queues. The following
table shows the default and configurable event types by Country mode:
naidanaC
)edomycageL-noN(
ASU
)edomycageL-noN(
-/eporuE
aisA
cificaP
ycageL
edom
*1SNM*1SNMMLAmralA
MLAMLALBTyrosivre
puS
*2SNM*2SNMytiruceS
GME*SAGelbuorT
PUSPUS
GDLBCES
LBTLBT
*TSNM*TSNM
**HTO
delbanefI*
elbarugifnocresU**
Meaning of Acronyms:
mynorcAgninaeM
1SNMytiroirptsehgihsastneveSNM
MLAstnevemralAeriF
2SNMytiroirprewolhtiwtneveSNM
mralAeriFnaht
GMEycnegremE
SAGstnevesaG
PUSyrosivrepuS
GDLBytefasgnidliuB
CESytiruceS
LBTelbuorT
TSNMelbuorTSNM
HTOepyttnevemotsuc-
rehtO