Building Technologies A6V10334410_h_en_--
Fire Safety 2015-09-29
10 Annex
10.1 Fault indication
To make it easier to interpret the fault indicator, you can print this page and keep
the graphic and description next to the LEDs that light up. To print this page, set
your device to A4 paper without any scaling.
־
־
־
Housing cover open
Power supply fault
Incorrect configuration
GPI wiring faulty
GPI connection configured incorrectly
Air aspiration/air flow measurement fault
Invalid smoke detector configuration
4…20 mA connection defective
Relay connection defective
Detection chamber defective
Indicator control defective
Detector component defective
See also
Fault analysis [➙ 104]
To Next Page
Loading...
Need help?
General
