Siemens FIDAMAT 6 - Technical Specifications; General Technical Data

Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
26 A5E45779144002-01, 09/2018
7
Technical specifications
7.1
General technical data
The general technical specifications apply to all analyzer versions unless they are not defined otherwise in the technical
specifications of the analyzer versions.
The technical specifications listed in this document are an excerpt that includes all safety-related data. The complete
technical specifications can be found in the respective operating instructions of your analyzer.
Enclosure
Position of use of the analyzer Front panel vertical
Degree of protection
IP20 according to EN 60529
Electrical characteristics
EMC interference immunity
(with safety extra-low voltage (SELV) with
safe isolation)
In accordance with standard requirements of NAMUR NE21 or EN 61236
Electrical safety According to EN 61010-1,
overvoltage category III
Power supply
• ULTRAMAT 23
• All other analyzers:
120 V AC, +10%/-15%, 50/60 Hz or
200 V AC, +10%/-15%, 50 Hz or
230 V AC, +10%/-15%, 50/60 Hz or
100 V AC, +10%/-15%, 60 Hz
100 V AC to 120 V AC, 50/60 Hz or
200 V AC to 240 V AC, 50/60 Hz
Climatic conditions
Permissible ambient temperature
• During operation
– CALOMAT 6E, article no. 7MB252x-
xGAxx
– All other analyzers:
• During transportation and storage
+5 to +55 °C
+5 to +45 °C
-30 to +70 °C
Vibrations
• During operation
• During transportation and storage
None
Maximum vibration 5 m/s
2
Permissible ambient pressure
700 to 1200 hPa absolute
Note
The information
on the technical specifications is based on DIN EN 61207/IEC 61207.