F
APPENDIX 13
TESTING / MAINTENANCE If the system is connected to the fire department, etc., or actuates an internal
system, disarm the appropriate outputs before servicing to prevent actuation. (See
PMI/PMI-2/PMI-3 Operation for procedures.) Notify the fire department and person-
nel at your facility that a System test is being performed so that any alarm sounding
can be ignored during the test. Notify the fire department before resetting the
system.
Inspection, Testing, and Maintenance of the fire alarm system should be peformed in
accordance with NFPA 72, The National Fire Alarm Code and all applicable local codes.
To Next Page
Loading...
Need help?
General
