99
Setting the base station via the handset
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 24.03.2010
Version 8, 03.09.2008
Restoring the base station to the factory settings
Resetting the base station via the menu
Each individual setting is reset, in particular:
u VoIP settings such as VoIP provider and account data and DTMF settings
(
£ Page 102, Page 121, Page 144)
u Settings for the local network (£ Page 104, Page 118)
u Default line (£ Page 100)
u The names of the handsets (£ Page 86)
u SMS settings (e.g. SMS centres, £ Page 70)
u Eco mode is deactivated (£ Page 81)
u PABX connection settings (£ Page 107)
SMS lists, calls list are deleted.
The following are not reset:
u Date and time
u System PIN
The handsets are still registered.
§Menu§ ¢Settings ¢ Base ¢Base Reset
~ Enter the system PIN and press §OK§.
§OK§ Press the display key to confirm.
Resetting the base station using a key on the base station
As with resetting the base station via the menu, all individual settings are reset. The
system PIN will also be reset to "0000" and all handsets registered above and
beyond the scope of delivery will be de-registered.
¤ Remove the cable connections from the base station to the router (£ Page 20)
and fixed line network (
£ Page 19).
¤ Remove the base station mains adapter from the socket (£Page 19).
¤ Press and hold the registration/paging key (£ Page 2).
¤ Plug the mains adapter back into the power socket.
¤ Press and hold the registration/paging key (at least 10 sec.).
¤ Release the registration/paging key. The base station has now been reset.
You will then need to "prepare to use" the base station again, i.e. re-establish the
cable connections to the fixed line network and the router and make the settings
for VoIP telephony (
£ Page 21).
Please note
For how to reregister the handsets after resetting, where applicable, £Page 83.
To Next Page
Loading...
