79
Using the network mailbox
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 24.03.2010
Version 8, 03.09.2008
Configuring the network mailbox for fast access
With fast access you can dial a network mailbox directly.
Assigning key 1 of the handset, changing assignments
The setting for fast access is handset-specific. You can assign a different mailbox to
key on each registered handset.
No mailbox is preconfigured for fast access in the default settings.
Preconditions:
u At least one receive number is assigned to the handset.
u The corresponding network mailbox has been entered and activated for at least
one of the receive numbers on the handset.
Fast access has not yet been set on the handset:
Press and hold key .
Or:
§Menu§ ¢Voice Mail ¢ Set Key 1
Select and press
§OK§.
s Select network mailbox and press §OK§ (=on).
The selection includes the network mailboxes that belong to a VoIP/fixed line net-
work connection and whose phone number is assigned to the handset as a receive
number. Net AM: xxx are displayed, where xxx is replaced by the respective stand-
ard name of the connection (IP1 to IP6, Fixed Line).
If a number has already been saved to the base station for the selected network
mailbox, fast access is activated.
a Press and hold (idle status).
If no number has been saved for the network mailbox the message Not possible! is
displayed. You then have to first enter the mailbox number using the Web configu-
rator (
£ Page 143).
Calling the network mailbox and listening to messages
Press and hold.
If you have set a network mailbox for fast access you will be connected directly to
this network mailbox (external call).
d If necessary, press the handsfree key.
You will hear the answering machine announcement.
Please note
You can only assign fast access to one mailbox.
However, you can also call the network mailbox assigned to a handset's receive
numbers directly via the message key (
£ Page 80).
To Next Page
Loading...
