Siemens Gigaset A580IP - Changing a Handsets Internal Number; Changing the Name of a Handset

86
Using several handsets
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 24.03.2010
Version 8, 03.09.2008
Changing a handset's internal number
A handset is automatically assigned the lowest free number when it is registered.
In the list of internal participants, the handsets are sorted according to their internal
number.
You can change the internal number of all registered handsets (1–6). The numbers
1-6 can only be assigned once each.
k Open the list of registered handsets.
§Menu§ Press the display key.
Edit Handset Number
Select and press
§OK§.
q Select handset.
~ Enter the new internal number (1–6). The handset's old number is over-
written.
q~ If necessary, select another handset and change its number.
After all the changes are completed:
§OK§ Press the display key to save the input.
a Press and hold (idle status).
You will hear the error tone if an internal number has been allocated twice.
¤ Repeat the procedure with a free number.
Changing the name of a handset
The names "INT 1", "INT 2" etc. are assigned automatically on registration. You can
change these names. The changed name is displayed in every handset's list.
k Open the list of registered handsets.
q Select handset.
§Menu§ Press the display key.
Change Handset Name
Select and press
§OK§. The handset's current name is displayed.
X Delete the old name if necessary.
~ Enter new name (max. 10 characters) and press §OK§.
a Press and hold (idle status).
Please note
If you delete the current handset name with Xand then press §OK§ without enter-
ing a new name, the handset will automatically be allocated the standard name
"INT x" (x= internal number).