85
Using several handsets
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 24.03.2010
Version 8, 03.09.2008
Locating a handset ("paging")
You can locate your handset using the base station.
¤ Briefly press the registration/paging key on the base station (£ Page 2).
All handsets will ring at the same time ("paging"), even if ringers are switched off.
The current (local) IP address for the base station appears in the handset displays.
Example:
Ending paging
¤ Briefly press the registration/paging key on the base station (£ Page 2).
Or
¤ Press the talk key c or end call key a on any handset.
Or
¤ Do not press any key on the base station or handset:
After approx. 30 seconds, the paging call will end automatically.
Please note
u An incoming external call will not interrupt the paging process.
u If there is an internal connection between the two handsets, paging is not pos-
sible.
To Next Page
Loading...
