Siemens Gigaset A580IP - Page 27

26
First steps
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / starting.fm / 24.03.2010
Version 8, 03.09.2008
Please note ...
... when entering access data, it is case sensitive.
To switch between upper and lower case and digits, press the # key (several
times if necessary). You can see briefly in the display whether upper case, lower
case or digits is selected.
Characters entered incorrectly can be deleted using the left display key below
X.
The character to the left of the cursor will be deleted.
You can navigate within the input field using the control key p (press up/down).
If your VoIP provider does not require a user
name, this step can be skipped.
¤ Using the keypad, enter the user name
that you received from your VoIP pro-
vider.
¤ Press the key under §OK§ on the display
screen.
¤ Using the keypad, enter the authentica-
tion name that you received from your
VoIP provider.
¤ Press the key under §OK§ on the display
screen.
¤ Use the keypad to enter your password.
¤ Press the key under §OK§ on the display
screen.
Username:
ÛT
OK
Authentication
Name:
ÛT
OK
Authentication
Password:
ÛT
OK