32
Integration in the network
Gigaset WLAN Repeater/ englisch / A31008-E505-B105-1-7619 / network_config.fm / 08.03.2004
Windows XP
To set a static IP address for a PC:
ì Click on Start – Control panel, select Network and Internet Connections and then
click on the Network Connections icon.
ì
Double-click the LAN connection with which you are connected to the Gigaset
WLAN Repeater.
ì On the General tab, click on Properties.
ì Select Internet protocol (TCP/IP) and click on Properties.
ì Activate the option Use the following IP address.
ì Enter the IP address for the PC in the IP address box. Please bear in mind the infor-
mation on page 31.
ì Enter the subnet mask in the Subnet mask box.
ì Enter the IP address of the Access Point or the Router in the Default gateway box
(not the address of the Gigaset WLAN Repeater).
ì Activate the option Use the following DNS server addresses.
ì Enter the IP address of the Access Point or the Router in the Preferred DNS server
box (not the address of the Gigaset WLAN Repeater).
ì Click on OK or Close to close each window.
ì Restart your network (see page 37).
To Next Page
Loading...
Need help?
General