HiPath HG 1500 board
lan2de.c02
A31003-K5020-S100-6-7620
Service Manual
2-7
For internal use only Installation
Interfaces/connectors
●
X10: 6-pin shielded MiniDin socket for V.24 cable; see
Section 2.1.2.1
●
The board is connected to the system via the backplane. An adapter for the back-
plane (part number C39228-A7195-A10, US backplane: C39195-Z7404-A10) is
used to connect the LAN with an RJ45 connector, see
Figure 2-4.
Figure 2-3 HXGM interfaces (S30810-Q2930/Q2940-X/X100)
HXGM/HXGM2
to
BP
V. 2 4X10
Backplane
LAN 2*
X8
LAN 1
X9
LED H2 (green)
LED H1 (red)
*) LAN 2 - for HXGM board with 2nd LAN interface only
Adapter
connection
To Next Page
Loading...
