Siemens Hicom 150 H - Hipath HG 1500 Installation; Installation Requirements; Slot; Table 2-13 Slots

HiPath HG 1500 boards
Installation For internal use only
A31003-K5020-S100-6-7620
2-14 Service Manual
lan2de.c02
2.3 HiPath HG 1500 installation
2.3.1 Installation requirements
●
Free slot for boards
●
Hicom 150 E Office as of SW Version 2.2/Hicom 150 HV 1.0
●
ISDN trunk connection
●
LAN connection
●
See also
Ta bl e 2 - 1 and Ta bl e 2 - 5
●
A DSL port is necessary for the HXGS/HXGM board with 2nd LAN
2.3.2 Slot
Special country variants are not provided for. Examples of maximum system config-
urations:
Table 2-13 Slots
Maximum system configurations for Hicom 150 E OfficePro are contained in the Hi-
com 150 E Office/Hicom 150 H Service Manual.
System Slot Configuration Trunk Station
OfficePoint 2 SLA 4/8/16
SLU8
STLS 2/4
TLA 2/4/8
HiPath HG 1500
16 ports ISDN So
MSI lines
8 Upo/E + 16 from
OfficeCom 6 SLA 4/8/16
SLU8
STLS 2/4
TLA 2/4/8
TS 2
HiPath HG 1500
30 ports ISDN
S2m ISDN So
MSI lines
24 Upo/E + 48
from