HiPath HG 1500 board
lan2de.c02
A31003-K5020-S100-6-7620
Service Manual
2-15
For internal use only Installation
2.3.3 Installation procedure
Table 2-14 Installation procedure in the case of OfficePoint/Com
This sequence must be observed in order to guarantee successful LAN board login.
Note
In the case of Hicom 150 E/H OfficePro, the board can be plugged and unplugged
without disconnecting the power supply.
Step Task
1. Remove the power plug.
2. Insert the board.
3. Insert the power plug.
To Next Page
Loading...
