Siemens Hicom 150 H - Page 37

Initial startup of HiPath HG 1500
Startup For internal use only
A31003-K5020-S100-6-7620
3-6 Service Manual
lan2de.c03
Configuring Services
Configuring neighbors
Note
Detailed configuration examples can be found in the Administration Manual for HiPath
HG 1500 (A31003-K5020-B811-*-7619).
Step Task
1. Press the
Services
button and then click
Add
.
2. Under
Description
, enter a description for the service, e.g. "Hicom 150 E".
3. Under
Prefix
, enter the correct code, which must match the HiPath HG
1500 gateway prefix set up in the HLB0, e.g. "0" (only digits, possibly mul-
tiple).
4. Enable
Allow as default for online endpoints
if the service is to be as-
signed to all endpoints registered at the gateway (otherwise, the service
will need to be individually assigned to each endpoint that may use it).
5. Enable
Allow for public endpoints from other zones
if endpoints from
other H.323 zones may use the service.
Step Task
1. Press the
Neighbors
button and then click
Add
.
2. Under
Description
, enter a description for the other zone, e.g. "Depart-
ment XYZ".
3. Under
IP address
, enter the IP address of the gatekeeper for the other
zone.