Siemens HiPath 1100 Series - Activating System Programming Mode

Programming Mode
15
Step by Step
Numbering Plan:
The instructions that follow refer to the factory default
settings.
Activating System Programming Mode
We recommend using a system telephone with a
display. If this is not possible, you may use a standard MF
telephone. Programming cannot be executed using a
pulse dialing telephone.
Lift the handset at the programmer’s extension slot.
Enter the code for activating the System Programming.
Enter the system password (default is 31994 - Changing
system password Æ page 88).
You will hear a tone indicating that you have now
accessed the Programming Mode.
Description HiPath 1120 HiPath 1130 HiPath 1150 HiPath 1190
External line 801 to 806 801 to 817 801 to 845
Extension, including S
0
11 to 30 11 to 60
610 to 621
11 to 60
610 to 645
101 to 240
Groups of external lines 0
890 to 899
Call Groups (CG) 770 to 779
Hunt Groups (HG) 780 to 789
UCD Subscriber Groups 790 to 799
USB/CAPI line 10 10 100
Standard telephones v. system telephones:
The step by step instructions on how to program
a system are based on a standard telephone. If
you are using a system telephone consider the
following:
g
SPEAKER = HOOK
j
FEATURE = (Service)
*
9 5
*