Siemens HiPath 1100 Series Programming Manual

Step by Step
Important Notes
4
How To Use This Manual
The steps for programming the system are presented
sequentially in graphic format under the column "Step
by Step" on the left side of each page.
The graphic symbols have the following meaning:
FLASH Key - Standard MF telephone
FIL Key - System telephone
Press the Flash key if you are using a Standard MF tele-
phone.
Programmable key.
Lift the handset.
Replace the handset.
Initiate conversation.
,...Enter numbers, keys, passwords, internal or external
phone numbers, etc.
Back, Next and Enter Keys.
Press the key with the LED turned off.
Press the key with the LED turned on.
Press the key with the blinking LED.
Wait to hear an audible tone through the handset or
speaker.
An extension is calling.
All steps of operation described in this document apply
to system telephones and standard telephones.
d
d
(
)
*
8 8
<< D >>
HiPath 1100 Systems

Siemens HiPath 1100 Series Specifications

General

Brand	Siemens
Model	HiPath 1100 Series
Category	Telephone
Language	English