20/245
Building Technologies Division Basic Documentation LME7... CC1P7105en
Infrastructure & Cities Sector 0 29.11.2011
1.9 Typographical conventions
1.9.1 Safety notes
This Basic Documentation contains instructions which must be observed to ensure your
own personal safety and to prevent damage to equipment and property. The
instructions and notes are highlighted by warning triangles, arrows or a hand symbol
and are presented as follows, depending on the hazard level:
Danger
means that death, severe personal injury or substantial
property damage will occur if adequate precautionary
measures are not taken.
Warning
means that death, severe personal injury or substantial
property damage can occur if adequate precautionary
measures are not taken.
Caution
means that minor personal injury or property damage
can occur if adequate precautionary measures are not
taken.
Note draws your attention to important information on the
product, on product handling, or to a special part of the
documentation.
Reference refers to further information given in other pieces of
user documentation, chapters or sections.
Only qualified personnel are allowed to install and operate the equipment. Qualified
personnel in the context of the safety-related notes contained in this document are
persons who are authorized to commission, ground and tag devices, systems and
electrical circuits in compliance with established safety practices and standards.
Note the following:
The device may only be used on the applications described in the technical
documentation and only in connection with devices or components from other suppliers
that have been approved or recommended by Siemens.
The product can only function correctly and safely if shipped, stored, set up and
installed correctly, and operated and maintained as specified.
Qualified personnel
Correct use
To Next Page
Loading...
