To Next PageTo Next Page
Need help?Do you have a question about the Siemens LME71.000A2 and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | LME71.000A2 |
| Category | Controller |
| Language | English |
General safety warnings and precautions for handling the LME7 burner control unit.
Guidelines for the safe and correct installation and mounting of the LME7 unit.
Instructions and precautions for the proper installation of the LME7 burner control unit.
Guidelines for disturbance-free signal transmission and safe electrical connection of flame detectors.
Key checks and procedures required prior to commissioning the LME7 system.
Technical specifications for the LME7 basic unit, including mains voltage, frequency, and weight.
Details on input terminal ratings, including voltage detection and contact material recommendations.
Specifications for output terminal ratings, including rated voltage, current, and power factor for various outputs.
Information on flame supervision methods, including ionization probes.
Technical data and usage guidelines for QRA2, QRA4.U, and QRA10 flame detectors.
Conditions that must be met for a successful burner startup sequence.
Behavior of the burner control in case of undervoltage conditions.
Explanation of the control sequence and responses in case of various faults.
Procedure for resetting the burner control after a lockout.
Procedure for activating visual diagnostics to identify the cause of faults.
Explanation of digital inputs, including safety loop and external controller inputs.
Detailed program sequence for PME71.401 for fuel train connection diagrams.
Comprehensive list of parameters for PME71.401 with value ranges and settings.
Comprehensive list of parameters for PME71.402 with value ranges and settings.
Comprehensive list of parameters for PME71.901 with value ranges and settings.
Comprehensive list of parameters for PME72.521 with value ranges and settings.
Comprehensive list of parameters for PME72.541 with value ranges and settings.
Comprehensive list of parameters for PME73.810 with value ranges and settings.
Comprehensive list of parameters for PME73.820 with value ranges and settings.
Comprehensive list of parameters for PME73.830 with value ranges and settings.
Comprehensive list of parameters for PME73.831 with value ranges and settings.
Comprehensive list of parameters for PME73.840 with value ranges and settings.
General operational procedures, including parameter saving and first startup checks.
How to interpret fault status messages, error codes, and info displays with lockout.
Steps for first startup or after program module replacement, including data download.
Procedure for performing a manual backup of settings and parameters.
Procedure for performing a manual restore of settings and parameters.
Detailed explanation of PWM control parameters and their functions.
Configuration of PWM safety parameters for reliable operation.
Procedures for initial configuration of basic PWM parameters.
Procedure for setting PWM safety parameters under worst-case conditions.
Steps to set and verify safety parameters under worst-case conditions.
