82/327
Building Technologies Basic Documentation LMV5... CC1P7550en
5 Sequence diagrams 22.05.2018
12, repetition > 0
Checking with controller ON
Deviation ↑ 10
No repetition decrement
Without valve proving
70
With valve proving ↑ 80
Stop, upto phase maximum time
01
0...3 s
Stop, upto phase maximum time
10
Output OFF / input Don’t care
Output ON / input ON
Permissible positioning range
In Standby: actuator can travel within the permissible positioning range, but is always driven
to the home position. Must be in the home position before changing the phase
0° Position as supplied (0°)
90° Actuator fully open (90°)
Legend to the sequence diagrams (cont’d)
To Next Page
Loading...
