Siemens LOGO! 0BA7 - Hardware and Software Components for the Simulation of the Controlled System

2 Solution
Set23_RegSim
Entry ID: 23753479, V2.3.S, 02/2014
8
© Siemens AG
2014 All rights reserved
Configuration software/tools
Table 2-3
Component
No.
Article number
Note
LOGO!Soft Comfort V7
1
6ED1058-0BA02-0YA1
2.4 Hardware and software components for the simulation
of the controlled system
Note
With this component, it is possible to simulate the controlled system.
The components listed here are needed in addition to the hardware listed in
section 2.3.2.
If you do not use the 1.2 kW motor described in chapter 3.1, the controlled
system parameters must be adapted according to the technical data of the motor
you are using as an alternative.
Hardware components
Table 2-4
Component
No.
Article number
Note
CPU 1211C,
DC/DC/DC, 6DI/4DO/2AI
1
6ES7211-1AE31-0XB0
or another
S7-1200
CSM 1277 COMPACT
SWITCH MODULE
1
6GK7277-1AA10-0AA0
or another switch with
4 RJ45 ports
Accessories
Table 2-5
Component
No.
Article number
Note
Ethernet patch cable
3
6XV1850-2H…
LOGO! ↔ Switch
PG/PC ↔ Switch
S7-1200 ↔Switch
Configuration software/tools
Table 2-6
Component
No.
Article number
Note
STEP 7 V12 Basic
6ES7822-0AA02-0YA5
Make sure that you have always installed the latest service packs and updates.