Siemens MAMMOMAT NovationDR - Chapter 2: Theory of Operation; Normal Operations Sequence

Siemens AG SPB7-250.844.01 Page 12 of 16 Mammomat Novation
DR
Medical Solutions Rev. 03 08.04 CS SD 24 Wiring Diagrams
2-12 X041E
“*SIGNAL” = “SIGNAL” active low.
** = Not used
Page Signal Name Origin Via Destination Testpoint LED
n.a. PU D802 D802 PU
3-16/5C QUAD A D814 M4:1, :2, :3, :4
3-16/5C QUAD A RET (0V) D814 M4:1, :2, :3, :4
3-16/5C QUAD B D814 M4:1, :2, :3, :4
3-16/5C QUAD B RET (0V) D814 M4:1, :2, :3, :4
n.a.
*
RELEASE D801 D802 D802 RELEASE
3-6/1E
*
RESET D801
3-16/2C RESET D801 D805
3-6/1E
*
RESET_HW D801
3-6/1E RESET_SW D801
n.a. ROT_CW D807, D808 D805 D801, D802
n.a. ROT_CCW D807, D808, D805 D801, D802
3-6/3D RXD D801 D801 RXD
n.a.
*
SEL_ROT D801 D802 D802 SEL_ROT
3-17/3C SELECT_WING1
**
S891, S894 D805 D801
3-17/4C SELECT_WING2 S895 D805 Object table 2
3-16/1D SMART_RX D805 SMART_RX
3-16/1F SMART_TX D805 SMART_TX
n.a.
*
SPEED D801 D802 D801, D802 SPEED
3-6/2B STAND_REQ_HV_OFF
(*KVA)
D801 D750 KVA
3-17/4C STEREO_LEVER S860 D805 D801
3-17/1B TABLE_CONFIG OBJ.TABLE D805 D801
n.a. TACHO Tacho switch D802 D802 TACHO
n.a. THICKNESS R863 D801
3-11/5E THICKNESS_B THICKNESS D801
n.a. THICKNESS_STE-
REO
D801 X885
n.a. TILT S896/D810 D805 D801 D810 V8
n.a. TUBE_ANGLE R803 D805 D801
3-6/4D TXD D801 D750 D801 TXD
n.a. ZERO D804 D804.X843 pin 4
LIST OF VOLTAGES AND TEST POINTS, STAND 0