Parameter Value
Smallest Measuring Range (at 60°C oven temperature) 0 to 1 ppm ±3%
Typical Measuring Range (at 60°C oven temperature) 0 to 100 ppm ±1% FS
up to
0 to 100% ±0.5% FS
Dynamic Range 10
7
Linear Range 10
6
Selectivity Combustible Components
Temperature Range 105 to 260°C
4.6 Filament Detector
The Filament Detector is a two-cell device that provides a reference and a sample sense signal,
typically used in applications along with the FID.
Component Locations
Figure 4-16 FID and Filament Detector in Typical Analyzer
Flame Ionization Detector
4.6 Filament Detector
Maxum Edition II Detectors
48 Service Manual, May 2018, A5E42019847001
To Next Page
Loading...
