Need help?Do you have a question about the Siemens MAG 6000 and is the answer not in the manual?
General| Type | Electromagnetic Flow Meter |
|---|---|
| Nominal Diameter | DN 15 to DN 3000 |
| Lining Material | PTFE, Hard Rubber, Polyurethane |
| Electrode Material | Stainless Steel, Hastelloy, Tantalum, Platinum |
| Flow Rate Range | 0 to 12 m/s |
| Protection Class | IP67, IP68 |
| Communication | HART, PROFIBUS PA, PROFIBUS DP, FOUNDATION Fieldbus |
| Output Signals | 4 to 20 mA, Pulse/Frequency |
| Power Supply | 24 V DC |
| Process Temperature Range | -40°C to +180°C (depending on lining material) |
| Ambient Temperature Range | -40°C to +60°C |
Detailed technical data for MAG 3100 series sensors, including operating pressure, temperature, and material specifications.
Technical specifications for MAG 5000 transmitter, covering mode of operation, input/output, and certifications.
Technical specifications for MAG 6000 transmitter, covering input/output, power supply, and communication.
Step-by-step instructions for installing the compact polyamide transmitter for MAG 5000/6000.
Instructions for remote installation of the transmitter by mounting the SENSORPROM® unit on the connection plate.
Diagram showing the electrical connections for MAG 5000 and MAG 6000 transmitters.
Details current and digital outputs, including signal range, load, and pulse settings.
Describes digital and relay output configurations, including error level and number.
Detailed troubleshooting guide for MAG transmitters covering common issues like empty display, no flow, and unstable signals.
To Next Page
