right page (15) of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:54)
Siemens AG 2003, L:\MC60_Maguro\en\fug\_von_itl\MC60_fug_EN_031009\MC60_fug_EN_031009_FM\MC60_Startup.fm
15Security
VAR Language: English; VAR issue date: 16-Juli-2003
§Menu§ ¢ m ¢ Security ¢Codes
Chg.phonecode
(Change phone code)
You define the phone code (4-8 dig-
its) when you call up a phone-code
protected function for the first time
(e.g. Babysitter p. 22). It is then valid
for all phone-code protected func-
tions.
Following the third unsuccessful at-
tempt, access to the phone code and
the functions that use it is denied. If
this happens please contact Siemens
Service (p. 95).
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Preventing accidental
activation
Even if PIN control is deactivated
(p. 14) confirmation is required to
switch on the phone.
This prevents the phone from being
switched on accidentally, e. g. when
carried in a pocket or whilst you are
on an aircraft.
B
Press down.
§OK§ Press. The phone switches
on.
§Cancel§ Press or take no action.
The phone does not
switch on.
Additional information
Screensaver......................................p. 60
Auto key lock.....................................p. 64
Further security settings....................p. 71
Please confirm switch on
OK Cancel