Siemens MC60 - Keypad and Phone Setup; Keypad Operation Settings; Phone Setup Options

©
Siemens AG 2003, L:\MC60_Maguro\en\fug\_von_itl\MC60_fug_EN_031009\MC60_fug_EN_031009_FM\MC60_Setup.fm
left page (64) of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:59)
Setup64
VAR Language: English; VAR issue date: 16-Juli-2003
Keys
§Menu§ ¢ m ¢ Keys
¢ Select function.
Any to answer
Incoming calls can be accepted by
pressing any key
(except for
B
).
Auto key lock
If activated, the keypad is locked
automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Key tones
You can set the type of acoustic key
tone:
Click or Tone or Silent
Phone setup
§Menu§ ¢ m ¢ Phone setup
¢
Select function.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it (see
also p. 20).
Hide ID b
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service providers).
To suppress this display, you can
enable the "Hide ID" mode for all
subsequent calls or just for the next
call. You may need to register
separately with your service provider
for these functions.
Divert
You can specify when calls should
be diverted to your mailbox or other
numbers.
Additional information
The keypad can also be directly locked and
unlocked in idle state.
In each case:
#
Hold down.