Siemens MC60 User Manual

right page (17) of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:55)
©
Siemens AG 2003, L:\MC60_Maguro\en\fug\_von_itl\MC60_fug_EN_031009\MC60_fug_EN_031009_FM\MC60_Phone.fm
17Calling
VAR Language: English; VAR issue date: 16-Juli-2003
Calling
Dialling with number
keys
The phone must be switched on
(standby mode).
J
Enter number (always
with area code/interna-
tional dialling code).
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
A
Press the Call key. The
displayed phone number
is dialled.
End call
B
Press the End key briefly.
Press this key even if the
person on the other end
of the line has hung up
first.
Set volume
G
Use the top of the control
key to start adjusting the
volume. Then press
top/bottom to adjust the
volume as required
(only possible during a
conversation).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redial
To redial the phone number last
called:
A
Press the Call key twice.
To redial other numbers that were
dialled previously:
A
Press the Call key once.
I
Pick out the required
phone number from the
list, then to dial ...
A Press ...

Siemens MC60 Specifications

General

Brand	Siemens
Model	MC60
Category	Cell Phone
Language	English