Siemens MC60 User Manual

©
Siemens AG 2003, L:\MC60_Maguro\en\fug\_von_itl\MC60_fug_EN_031009\MC60_fug_EN_031009_FM\MC60_Setup.fm
left page (62) of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:59)
Setup62
VAR Language: English; VAR issue date: 16-Juli-2003
Audio
§Menu§ ¢ m ¢ Audio
¢ Select function.
You can set the tones to match your
needs.
Ringer setting
On/Off Activate/deactivate all
tones.
Beep Reduce ring tone to a
short signal (beep).
Silent alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alternative.
The silent alert can also be activated
in addition to the ring tone (e.g. in
noisy environments). This function
is deactivated when the battery is
being charged.
The silent alert is activated if the
highest volume is set for the ring
tone. This is to remind you not to
hold the phone to your ear when ringing
in order to avoid damaging your
hearing.
Volume
Set different volumes for types of
call/functions.
I
Select:
Incoming calls (see below)
Alarm
Alarm clock
Messages
Cell broadcast
Start melody
End melody
Applications
§Select§ Press. Der Klingelton wird
wiedergegeben.
I
Set volume.
§OK§ Confirm.
Incoming calls
You can assign different volumes to
d Calls, Other calls and each group in
the Phonebook.
Additional information
*
Switch ringtone on/off.
k
Display: Beep.
j Display: ringer off.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ring tones.
If two independent phone numbers are
registered on your phone, you can set
different volumes for them (p. 73).

Siemens MC60 Specifications

General

Brand	Siemens
Model	MC60
Category	Cell Phone
Language	English