Siemens AG 2003, L:\MC60_Maguro\en\fug\_von_itl\MC60_fug_EN_031009\MC60_fug_EN_031009_FM\MC60_faq.fm
left page (94) of MC60 Maguro en, A31008-H5760-A1-1-7619 (09.10.2003, 14:36)
Questions & Answers94
VAR Language: English; VAR issue date: 16-Juli-2003
Text message
cannot be sent.
Service provider does not
support this service.
Contact your service provider.
Phone number for service
centre not set or incorrect.
Set service centre (p. 44).
SIM card contract does not
support this service.
Contact your service provider.
Service centre too busy. Repeat message.
Recipient does not have a
compatible phone.
Check.
EMS pictures &
sounds are not
displayed on the
destination phone
Destination phone does not
support the EMS standard.
No Internet access
possible.
Incorrect WAP profile set, or
wrong or incomplete settings.
Check settings or contact your service provider.
PIN error/
PIN2 error.
Three wrong entries. Enter the PUK (MASTER PIN) supplied with the SIM
card according to the instructions. If the PUK
(MASTER PIN) has been lost, please contact your
service provider.
Phone code error. Three wrong entries. Contact Siemens Service (p. 95).
Service provider
Code error.
No authorisation for this service. Contact your service provider.
Too few/too many
menu entries.
Functions may have been
added or deleted by the service
provider via the SIM card.
Check with your service provider.
No fax possible. Wrong settings in the PC. Check settings (p. 70).
No authorisation for this service. Contact your service provider.
Charge meter
does not work.
Charge pulse is not transmitted. Contact your service provider.
Damage
Severe shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became
wet.
Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry
connector contacts thoroughly. Stand mobile upright in an air current. Do not dismantle
the phone!
Problem Possible causes Possible solution
Reset all settings to factory default (p. 66):
*
# 9 9 9 9 #
A
To Next Page
Loading...
