Siemens MCP 398C - Page 46

1. Software version output
Simultaneously press the "FEED START" and "FEED STOP" keys ④.
The flashing of the LEDs is then suppressed and the SW version is output with three digits.
The individual digits are displayed digit-for-digit as in the following example when the keys are
held. The sequence is terminated with a dot.



① 1st digit of the SW version
② 2nd digit of the SW version
③ 3rd digit of the SW version
④ "FEED Start" and "FEED STOP" keys
Figure 8-2 Activating the SW version output
Example: SW version V02.02.16.00
1.
2.
Diagnostics
8.2 Output functions
Machine control panel: MCP 398C
46 Manual, 12/2017, A5E43199783B AA