Operating the removable voltage transformers
106 NXAIR M 139-2021.9 / 07
Procedure
Remove the padlock from the control gate.
Lift and hold the operating slide.
167: Lifting the operating slide
Insert the racking tool into the actuating opening with the guide pin pointing to the right.
Fig. 168: Inserting the racking tool
Push the racking tool into the door as far as it will go.
Turn the racking tool 90° counter-clockwise to unlock the racking mechanism.
Fig. 169: Turning the racking tool 90° counter-clockwise for unlocking
To Next Page
Loading...
