Siemens NXAIR M - Removing or Plugging on the Low-Voltage Connector; Taking the Withdrawable Disconnector Link out of a Panel or Inserting in a Panel; Earthing or De-Earthing the Feeder

Operating the disconnecting panel
76 NXAIR M 139-2021.9 / 07
11.6 Removing or plugging on the low-voltage connector
The procedure for removing and/or plugging on the low-voltage connector in the disconnecting panel is
identical with the procedure for removing and/or plugging on the low-voltage connector in the circuit-breaker
panel.
For removing and/or plugging on the low-voltage connector in the disconnecting panel, see
chapter 10.17 and/or 10.18.
11.7 Taking the withdrawable disconnector link out of a panel or inserting in a panel
The procedure for inserting and/or removing the withdrawable disconnector link in the disconnecting panel is
identical with the procedure for inserting and/or removing the withdrawable circuit-breaker in the circuit-
breaker panel.
For inserting and/or removing the withdrawable disconnector link in the disconnecting
panel, see chapter 10.20 and/or 10.19.
11.8 Earthing or de-earthing the feeder
The procedure for earthing and/or de-earthing the feeder in the disconnecting panel is identical with the
procedure for earthing and/or de-earthing the feeder in the circuit-breaker panel.
For earthing and/or de-earthing the feeder in the disconnecting panel, see chapter 10.15
and/or 10.16.