Siemens OH110 - Detector Base (Collective) DB110 R; Detector Base (Collective) DB110 RD

3
Structure and function
Accessories
24
Building Technologies A6V10316298_e_en_--
Fire Safety 2014-05-21
3.5.3 Detector base (collective) DB110R
l For the installation of point detectors
l The detector line is interrupted if the point detector
is not used
l An integrated resistor selects the second parameter
set in the point detector
l For the recess-mounted cable entry
l For the surface-mounted cable entry, up to 8 mm
cable diameter
l Compatible with:
– Multi-sensor fire detector OH110
– Smoke detector OP110
– Heat detector HI110
– Heat detector HI112
l Order no.: S54372-F7-A1
See also
2 Detector base (collective) DB110 / DB110x / DB110xx
[➙ 35]
3.5.4 Detector base (collective) DB110RD
l For the installation of point detectors
l Built-in diode (for BS 5839, part 1)
l If a point detector is not used, the diode fitted does
not interrupt the detector line
l An integrated resistor selects the second parameter
set in the point detector
l For the recess-mounted cable entry
l For the surface-mounted cable entry, up to 8 mm
cable diameter
l Compatible with:
– Multi-sensor fire detector OH110
– Smoke detector OP110
– Heat detector HI110
– Heat detector HI112
l Order no.: S54372-F8-A1
See also
2 Detector base (collective) DB110 / DB110x / DB110xx
[➙ 35]