Siemens OH110 - Detector Dust Cap

5
Mounting / Installation
Detector dust cap
44
Building Technologies A6V10316298_e_en_--
Fire Safety 2014-05-21
5.9 Detector dust cap
1. Cover the point detectors OH110 and OP110 with the detector dust cap during
the construction phase. This will protect the point detector from dust and dirt.
2. Once construction work is complete, remove the detector dust cap from the
point detector.
1
2
1 Point detector 2 Detector dust cap
A detector dust cap is included in the scope of supply for the point dete
ctors
OH110 and OP110.