Preface
1.1 Preface
SIMATIC NET PROFIBUS, Optical Link Module
2 Operating Instructions, 07/2008, A2B00065774O, Edition V1.5
Further documentation
You will find more information on other SIMATIC NET products that you can use with the
OLM V4.0 devices in the “SIMATIC NET PROFIBUS networks SIEMENS AG” manual.
Finding information
To help you find the information you require more quickly, the manual includes not only the
table of contents but also the following sections in the Appendix:
• Glossary
• Index
Audience
These operating instructions are intended for persons involved in the commissioning of
PROFIBUS networks with the link modules of the OLM V4.0 series.
Standards and approvals
The devices of the OLM V4.0 series meet the requirements for the CE mark. For detailed
information, please refer to chapter 6 of these operating instructions.
The devices of the OLM V4.0 series also meet the requirements for the UL, C-Tick, FM and
ATEX marks. For detailed information please refer to chapter 6 of these operating
instructions.
The devices of the OLM V4.0 series also meet several requirements for shipbuilding. For the
respectively valid approvals call our hotline +49-18050500222.
Furthermore you can gather information at:
http://support.automation.siemens.com
To Next Page
Loading...
Need help?
General
