Siemens Opdima MAMMOMAT 1000 - MAMMOMAT Stand with Single Rear Cover; Rear Cover

Installation 5 - 3
Siemens-Elema AB Register 3 SPB7-230.033.10 Page 3 of 26 Opdima?
Solna, Sweden Rev. 03 08.02 SPS-UD Installation
MAMMOMAT stand with single rear cover 5
Rear cover 5
1. Remove the screws (1/Fig. 3) at the top of the stand.
2. Pry loose the plastic strips (2/Fig. 3) on both sides using a screwdriver or similar
tool.
3. Remove the screws (3/Fig. 3) on both sides and remove the cover (4/Fig. 3).
High voltage!
Life-threatening electric shock hazard exists.
Switch off the power to the system with the main circuit breaker.
WARNING
1
2
3
OPD00266
4
Fig. 3 Removal of covers