Siemens OpenStage 60 - Team Call Features - Forwarding Calls on Trunks; Activating Call Forwarding on Trunks

Making calls in the team/executive/secretary configuration
145
Step by Step
Forwarding calls on trunks
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
Activating call forwarding for one trunk activates the
function for all trunk keys assigned to this trunk in your
group.
v Open the Program/Service menu Æ page 41.
Confirm.
Select and confirm the option shown.
S Press the required line key.
or
j Enter the required trunk number.
or
S If available. Press the "CFW MULAP" key.
(You have programmed a key with the incomplete "CFW
MULAP" function, excluding the call forwarding type
and destination Æ page 89.)
Confirm
or
select and confirm the option shown
or
select and confirm the option shown.
or
1 or 2 or 3 Enter the code.
j Enter the destination phone number.
Confirm.
or
S If available. Press the "CFW MULAP" key. (You have pro-
grammed the "CFW MULAP" key with the call forward-
ing type and destination, Æ page 89.)
Destinations g
Forward MULAP on
1=all calls
2=external calls only
3=internal calls only