Bluetooth
187
Step by Step
Using a Bluetooth headset
You can use any commercial Bluetooth headset with
your OpenStage 60/60 G/80/80 G.
Prepare your Bluetooth headset for connection with
your OpenStage by following the instructions in the rel-
evant user manual.
Proceed as following to prepare your OpenStage:
• Activate the Bluetooth function Æ page 172.
• Enter the headset in the linking list
[1]
Æ page 175.
• Establish the Bluetooth connection Æ page 174.
Testing a Bluetooth headset
Prerequisite: OpenStage and the Bluetooth headset
are connected (see procedure above).
o Press the key shown.
Z You hear the on-hook signal.
j Enter the station number.
The connection is established as soon as your input is
complete.
if nec.
X Set the call volume.
[1] only necessary the first time
Make sure your headset port is set up properly
Æ page 168.
To Next Page
Loading...
