Step by Step
Using team functions
148
Using team functions
If configured (consult your service personnel), your tele-
phone is part of a team. The team consists of internal
phones that are able to use certain functions.
Activating/deactivating a group call
If configured (consult your service personnel), you be-
long to one or more groups of stations, which can be
reached via hunt group or group call station numbers.
Incoming calls are signaled one after the other (= hunt
group) or simultaneously (= group call) on all phones in
the group, until a group member answers the call.
You can also belong to a team (including executive/sec-
retary configurations) in which station numbers are pro-
grammed on trunk keys Æ page 139.
Every group member can still be reached at his or her
personal phone number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding executive/secretary).
If the LED on a programmed "Hunt group" key is illumi-
nated Æ page 89, this means that the audible tone was
activated for at least one group.
c Open the idle menu Æ page 29.
Select and confirm the option shown
[1]
.
or
Select and confirm the option shown.
or
S or R Press the "Hunt group" key.
This function is not available for the executive
phone in team/executive/secretary configura-
tions.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) Æ page 153!
Leave group
[1] "Differing display view in a HiPath 4000 environment" Æ page 193
Join group
To Next Page
Loading...
