Siemens OpenStage 60 - Data Backup to USB Memory Stick - Restoring User Data; Selecting and Restoring User Data Backups

Step by Step
Data backup to USB memory stick
190
Restoring user data
Selecting a backup
Prerequisite: The USB memory stick is correctly
plugged in Æ page 188 and you have created at least
one data backup Æ page 189.
v Press the key shown until the "Settings" tab is active.
Confirm.
if nec.
j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the backup you want.
Restoring all user data
This operation overwrites all current user settings
Æ page 188 - irrespective of the status set Æ page 191
- with the selected backup.
Prerequisite: You have selected a backup and opened
the context menu Æ page 190.
Confirm the option shown in the context menu.
The "Restore {1}:" page is displayed.
W Select and confirm the entry "Backup password".
j Enter the password set during the backup.
Select and confirm the option shown to start the data
transfer.
User
Phone
Backup/Restore
17.08.07 14:42 3770 g
This can result in the loss of settings made since
the last backup.
Restore
Restore all g