Step by Step
Setting Up the Telephone Installing the Telephone
12
1212
12
Preparing for Operation
For the optiPoint 410 economy/standard, follow the se-
quence described below. The sequence for the
optiPoint 410 entry is described from Æ page 15.
optiPoint 410 economy/standard
If problems are encountered during the initial start up,
or if you have queries on individual specifications, the
following chapters will be of help:
• For specialized information on the administration of
the optiPoint 410 see "Alphabetical Reference"
Æ page 66.
• o For descriptions of different configuration-related
situations, see "Administration scenarios"
Æ page 88.
• For error messages in the display of the
optiPoint 410 see "Error Messages" Æ page 47.
Entering the administration area
ã Confirm to enter the Configuration Menu.
K Enter admin password
(default: 123456 Æ page 92).
ã Confirm.
The start up process sequence describes a stan-
dard case of configuration. Network configura-
tions that deviate from the standard case may re-
quire additional entries.
01=Configuration? >
To Next Page
Loading...
