Step by Step
Administration optiPoint 410 entry
50
5050
50
Restart
Making changes in the administration area Æ page 49.
ADG Press keys simultaneously.
or
CEN Press keys simultaneously.
K Enter the Administrator password
(default: 123456 Æ page 92).
During start-up the LEDs momentarily illuminate in suc-
cession.
Reset factory settings
For standard values, see Æ page 95.
Disconnect the red Western plug of the power supply
unit cable (Pos. 3 Æ page 10) or, if "Power over LAN",
disconnect the LAN cable (Pos. 1 Æ page 10) from the
optiPoint 410 for a few seconds.
J Lift handset.
BHI Press keys simultaneously.
KUTT Enter the reset password (124816).
N Confirm the entry.
P Replace the handset.
The resetting can lead to the failure of all the
functions of the optiPoint 410. Ensure that you
have all the necessary information for start up
Æ page 15.
To Next Page
Loading...
