Siemens optiPoint 500 Standard - Backlit Display; Adjusting the Display Contrast (Only Hipath 4000); Adjusting the Angle of the Display

Telephone settings
53
5353
53
Step by Step
Backlit Display
When using the optiPoint 500 advance, for example,
when entering a number, the display’s backlight auto-
matically turns on. The backlight turns off a few seconds
after you have finished activity.
Adjusting the display contrast
(only HiPath 4000)
The display has four contrast levels that you can set ac-
cording to your light conditions.
J
or
K
Press one of the keys while the phone is idle.
Select and confirm.
J
or
K
Change the display contrast. Press the key repeatedly
until the desired level is obtained
Save.
Adjusting the angle of the display
By swivelling the display unit, you can adjust it so that
you can read the displays clearly from your normal sit-
ting position.
This function is only available with the
optiPoint 500 advance.
Display contrast? >