Siemens optiPoint 500 Standard - Saving Functions, Procedures and Appointments; Assigning Functions to Keys

Step by Step
Checking the telephone
62
6262
62
Checking the assignment of functions
to keys
You can check which functions have been pre-assigned
to specific keys on your telephone. You can also check
what you have saved on individual keys yourself. The fol-
lowing types of key assignment are possible:
• Repertory dialing (Æ page 56)
• Direct station selection (Æ page 106 and
Æ page 108)
• Function (Æ page 58)
Precondition: The telephone is in the idle state.
Press the key. The lamp lights up.
=
Enter the service code.
or
Select and confirm.
and Press the required key.
The key assignment is displayed.
Confirm and then press another key to check the func-
tion assigned to it.
or
Press the key. The lamp goes out.
program/service
Key function?
Return?
program/service