Siemens optiPoint 500 Standard - Two-Way Voice Calling to a Variable Destination; Two-Way Voice Calling to a Fixed Destination (on Repertory Key)

Using HiPath 4000 as an intercommunication system
89
8989
89
Step by Step
Two-way voice calling to a variable
destination
With two-way voice calling within a group the destina-
tion loudspeaker and microphone are automatically ac-
tivated.
C
Lift the handset.
or if the handset is cradled: Handsfree talking (you cannot
use this function with optiPoint 500 economy/basic).
E
Enter the system code-number for "two-way voice
calling in a group" and
E
the speed dialing code for the group member in ques-
tion
or
Press the key for "two-way voice calling in a group"
(must be installed)
and
E
enter the speed dialing code for the group member in
question.
The destination telephone's loudspeaker and micro-
phone are automatically activated. .
Two-way voice calling to a fixed destination
(on repertory key)
The system code-number for "two-way voice calling in a
group" + the speed calling code for the group destina-
tion in question are stored on the repertory key
(Æ page 58).
Press the programmed repertory key.
The destination telephone's loudspeaker and micro-
phone are automatically activated.
Enter the code!