Siemens PCA2005-A1 User Manual

Commissioning and maintenance
Function test
8
A6V11571319_en--_b 33 | 34
8.1 Function test
Loop isolator (100V)
● Carry out the function test at the specified intervals in accordance with the local
requirements and standards.
● Perform the function test on site at the same time as the system acceptance
test
● Replace defective components immediately.
External LED on the Loop isolator LED
● If the LED is not working, check the polarity of the Loop isolator LED
component connections.

Siemens PCA2005-A1 Specifications

General

Brand	Siemens
Model	PCA2005-A1
Category	Security System
Language	English