Siemens ProtoAir Start-up Guide
Page 18 of 66
5.2 Connecting to the ProtoAir Over Wi-Fi Access Point
When the ProtoAir is first powered up, the Wi-Fi Access Point will be enabled allowing direct connection
to the ProtoAir with Wi-Fi.
To connect to the ProtoAir Wi-Fi Access Point:
• Click the icon (found in the bottom-right corner of the computer screen) to open the available
Wireless Network Connections.
• Select the desired ProtoAir and click Connect.
• Enter the Security key. The default is 12345678.
The available Wireless Network Connection menu should now show that the computer is connected to
the ProtoAir.
To Next Page
Loading...
