Siemens ProtoAir FPA-W44 - Network Settings; Navigate to the FS-GUI Network Settings

Siemens ProtoAir Start-up Guide
Page 24 of 66
9 NETWORK SETTINGS
9.1 Navigate to the FS-GUI Network Settings
• Open the FS-GUI page.
o From the Web Configurator page, click on the blue “Diagnostics & Debugging” button in the
bottom right corner of the screen
• Find the Navigation tree on the left side of the screen.
Figure 19: FS-GUI Landing Page
Figure 18: Web Configurator Page – Diagnostics Button