Siemens ProtoAir Start-up Guide
Page 60 of 66
Ch 4 Status Output Polarity
Ch 4 Status Output On delay
Ch 4 Status Output Off delay
Ch 4 Status Output Forced value
Ch 4 Discrete Input Input leading edge function
Ch 4 Discrete Input Input trailing edge function
Ch 4 Discrete Input Polarity
Ch 4 Discrete Input Debounce time
Ch 4 Analog Input Current mode
Ch 4 Analog Input Process value
Ch 4 Analog Input Upper range value pressure
Ch 4 Analog Input Lower range value pressure
Ch 4 Analog Input Upper range value temperature
Ch 4 Analog Input Lower range value temperature
Ch 4 Analog Input Upper range value density
Ch 4 Analog Input Lower range value density
Ch 4 Analog Input Upper range value viscosity
Ch 4 Analog Input Lower range value viscosity
Ch 4 Analog Input Fail-safe behavior
Ch 4 Analog Input Fail-safe value pressure
Ch 4 Analog Input Fail-safe value temperature
Ch 4 Analog Input Fail-safe value density
Ch 4 Analog Input Fail-safe value viscosity
Ch 4 Analog Input Trimmed input value
Ch 4 Analog Input Offset adjustment
Ch 4 Analog Input Gain adjustment
Ch 5/6 RTD wire configuration
Ch 5/6 Upper range value pressure
Ch 5/6 Lower range value pressure
Ch 5/6 Upper range value density
Ch 5/6 Lower range value density
Ch 5/6 Upper range value viscosity
Ch 5/6 Lower range value viscosity
Ch 5/6 Upper range value medium temperature
Ch 5/6 Lower range value medium temperature
Ch 5/6 Upper range value Xdcr temperature
Ch 5/6 Lower range value Xdcr temperature
Ch 5/6 Upper range value auxiliiary temperature
Ch 5/6 Lower range value auxiliary temperature
Ch 5/6 Fail-safe value pressure
Ch 5/6 Fail-safe value density
Ch 5/6 Fail-safe value viscosity
Ch 5/6 Fail-safe value medium temperature
Ch 5/6 Fail-safe value Xdcr temperature
Ch 5/6 Fail-safe value auxiliary temperature
Enable local access control
To Next Page
Loading...
