How to solve PXC Compact program and database not down-line loading properly on Siemens PXC-24 Compact Control Unit?
If the PXC Compact program and database are not down-line loading properly on your Siemens Control Unit, verify that the Insight software is at least Revision 3.7 (PXC-16 and PXC-24) or 3.10 (PXC-36).
General| Number of I/O Points | 24 |
|---|---|
| Power consumption | 15 VA / 8 W |
| Operating temperature | -20 °C to +60 °C |
| Mounting Type | DIN rail |
| Mounting | DIN rail |
| Dimensions | 160 x 140 x 70 mm |
| Protection class | IP20 |
| Enclosure Rating | IP20 |
| Supply voltage | 24 V DC |
| Power Supply | 24 V DC |
| Communication Protocols | BACnet MS/TP, Modbus RTU |
| Communication | BACnet MS/TP, Modbus RTU |
| Communication Interface | RS-485 |
| Storage Temperature | -40 °C to +70 °C |
| Relative Humidity | 10% to 95% (non-condensing) |
Covers firmware revision, licensing, and an introduction to supported point types.
Lists configurable and dedicated point types for PXC-16, PXC-24, and PXC-36 models.
Details memory types, Flash ROM, RAM, and backup batteries (AA, coin cell).
Covers communication connections, specs, and diagrams for HMI, Ethernet, RS-485.
Explains what PXC Compact on P1 is and its three-part database structure.
Details P1 mode applications, point mapping, and operational aspects.
Troubleshoots TX-I/O Island Bus errors, module failures, and component replacement.
To Next Page