27 / 94
Siemens RDF800KN.., RDF800KN/VB, RDD810KN/NF Basic documentation CE1P3174en
Smart Infrastructure 2020-02-21
All DIP switches must be set to OFF (remote configuration, factory setting) in order
to select an application using the commissioning tool.
Remote configuration, using one of the following tools (factory
set)
· Synco ACS
· ETS4
DIP switches
For more information, see the following sections:
· Section 3.4.1 “Applications for fan coil systems (RDF800KN..,
RDF800KN/VB only)”;
· Section 3.4.2 “Applications for universal systems (RDF800KN..,
RDF800KN/VB only)”;
· Section 3.4.3 “Applications for heat pump systems (RDF800KN..,
RDF800KN/VB only)”;
· Section 3.6.6 “Chilled/heated ceiling and radiator applications
(RDF800KN.., RDF800KN/VB only)”.
Remote configuration
RDF800KN..,
To Next Page
Loading...
Need help?
General
